Siemens Deka fuel injectors enhance engine performance and running quality through an optimized spray pattern. These high flow fuel injectors utilize a true 30 degree spray pattern for improved mixture preparation.
SPECIFICATIONS:
- Coil Resistance: 2.27 Ohms / Low Impedance / Low-Z (ECM peakd/hold driver may be required)
- Static Flow Rate @ 43.5PSI ( 300kPa / 3Bar ) w/Gas: 228 lb/hr = 2350 cc/min
- Static Flow Rate @ 50PSI ( 3.5Bar) w/Gas: 240 lb/hr = 2530 cc/min
- Static Flow Rate @ 58PSI ( 4.0Bar) w/Gas: 260 lb/hr = 2725 cc/min
- Compatible with ALL fuels; Flex Fuel E85, Standard Pump Gasoline, E100, Leaded Race Gas up to 120 octane, E10, E25, C85, M100
- Gain: 0.11ms/mg
- Offset: 0.64ms @ 14V
- Factory fitted with Viton upper and lower o-rings
- O-Ring Size: 14.5mm (Standard Bosch EV1 size)
- Turn on time @ 14VDC: 1.5ms
- Turn off time: @14VDC: 1.3ms
- Connector: Bosch EV1 / Jetronic
- Series: DEKA IV / 4
- Orifice Type: Single hole disc
- Spray Pattern: 10-15 Degree
- Body Design: Pencil Style
- Body Diameter: 20mm
- Body Length: 64 mm O-ring to O-ring, Overall length: 75mm
- Overall length: 75mm
- Brand Name:
- Siemens Deka
Limited warranty. Please visit www.highflowfuel.com/contact for assistance.