Note: This hanger does not include the fuel pump. It includes the hanger itself, Viton tank seal, and a PTFE corrugated flex hose. The HFP-AN50 is a direct drop-in AN fitting hanger for all 1986-1997 V8 Mustangs. The factory hanger from 1986-1993 used a 5/16" feed tube and a microscopic 1/4" return, so even if you were to braze/tig weld fittings to your factory hanger, the 1/4"return tube poses a significant restriction. Enter the all-new HFP-AN50 hanger. Not only has the return tube been enlarged to 5/16", it has also been lengthened, and now extends all the way to the bottom of the hanger, allowing fuel to flow directly to the bottom of the tank, preventing fuel aeration. The hanger comes standard with 6AN fittings on both the feed and return sides. Every HFP-AN50 hanger includes a corrugated teflon (PTFE) flex hose to connect the fuel pump outlet to the feed tube on the hanger, eliminating all rubber inside the tank. A new Viton tank seal is also included, making this a comprehensive solution for any fox body and SN95 owner looking to make BIG POWER.
- Brand Name:
- Quantum
- Fitting Type:
- -6AN
- Fuel Type:
- E85/Flex
All Quantum brand products are backed by a lifetime warranty. Quantum products that fail at any time will be replaced under warranty if it is determined that the failure was due to a defect in workmanship or material. This warranty only applies to the original customer and is non-transferable. Improper use or installation of the product voids this warranty, and Quantum is not responsible for incidental costs resulting from failure of the product. In the unlikely event that you should need to request a warranty please visit www.highflowfuel.com/contact for assistance.
